DC-DC Step Down 300W XL4016E1

270.00 EGP

XL4016E1 DC-DC Adjustable Step-Down Module (10A , 300W )

5-40V to 1.2-35V Adjustable Power Supply Module

Features

  • Input Supply voltage: 7 ~ 40V
  • Output voltage: continuously
  • adjustable 1.25 ~ 35V
  • Output Current: 8A (10A maximum)
  • Output Power: Max 300W
  • Conversion efficiency: 95%
  • Operating frequency: 300KHz
  • No-load current: Typical 20mA
  • Load regulation: ± 1%
  • Voltage Regulation: ± 1%
  • Length: 65mm
  • Width: 47mm
  • Height: 22mm
  • Weight: 70gm
Add to Wishlist
Add to Wishlist
SKU: 2113 Category: Tags: , ,

Output Ripple: about the ripple 50mV (without noise) 20M bandwidth (for reference) Input 24V Output 12V 5A measured.
Operating temperature: -40 ℃ to + 85 ℃ (please note the actual use of the power tube temperature, the temperature is too high, please enhance heat dissipation).
Applications:

  1. High-power LED driver.
  2.  Lithium battery(or lead accumulator) charge.
  3. Vehicle-mounted power supply.
  4. Low voltage system power supply.
  5. 6V, 12V, 14V, 24V battery charge.
  6. On-board laptop power supply.
  7.  regulated power supply.
  8. Low voltage power supply system
Parameter Specification
Device Type Buck Converter (Step Down DC-DC Converter)
Manufacturer XLSEMI
Package Type DIP-16
Input Voltage Range (Vin) 8V to 60V
Output Voltage Range (Vout) 1.25V to 36V (adjustable)
Maximum Output Current 16A (Continuous)
Maximum Power Output 300W
Switching Frequency 100 kHz
Efficiency Up to 96% at full load
Quiescent Current 10 µA (typical)
Load Regulation ±1.0%
Line Regulation ±0.5%
Thermal Shutdown Yes
Overcurrent Protection Yes
Soft Start Yes
Voltage Reference 1.25V
Compensation Internal
Operating Temperature Range -40°C to +85°C
Ripple Voltage 50mV (typical at full load)
Inductor Selection 33 µH to 100 µH (recommended)
Capacitor Selection Input: ≥ 100 µF, Output: ≥ 220 µF (ceramic)
Protection Features Overvoltage, Short circuit, Thermal shutdown
Applications Power supplies, Battery chargers, LED drivers, Industrial equipment
Footprint (mm) DIP-16: 19.0 x 6.0
Typical Application Circuit Buck converter schematic with feedback loop

Reviews

There are no reviews yet.

Be the first to review “DC-DC Step Down 300W XL4016E1”

Your email address will not be published. Required fields are marked *